Static ultrasonic soldering tank – KDB series
The special solder “Cerasolzar” melted in a static soldering tank and dip soldered.
It is used for coating/soldering of aluminum, ceramic PCBs and outer surfaces of electric discharge tubes (electrodes, structures etc.)
Pros of ultrasonic dip method
- Large amplitude, large output, large cavitation effect distance (gap between material and vibration surface.)
- Preheating with melted solder makes it easy for cavitation to occur.
Cons of ultrasonic dip method
- Difficult to selectively solder.
- Hard to change solder.
All types of coating solder
- Aluminum components
- Ferrite components
- Glass components
- Silicon wafers
- Ceramic components
- Semiconductor chips
- Metals etc.
Multiple material soldering and sealing
- Light fiber terminals
- Ceramic tubes and lead lines (for sensors)
- Glass tubes and lead lines (reed relays)
Pasting together multiple bonded materials
- Optical components
- Spare parts for machines
|Power source||AC100V 50／60Hz 800VA|
|Temperature||Typically around 400 Celsius|
|Transducer||Bolt tightening Langevin type 18-20 kHz|
|Generator unit||Automatic frequency tracking; output 400W max|
|Supplied nitrogen gas||Depending on application, max 30 l/min|
|Soldering tank size||dia48mm (Could be chosen from between several size depending on the type of job)|
From agreement to delivery: flow
Delivery takes approximately 3 months after receipt of order, depending on the volume of the device.
KURODA TECHNO Co.,Ltd.
COPYRIGHT ©2021 KURODA ELECTRIC CO.,LTD. ALL RIGHTS RESERVED.